| Donewaiting Friendship Farm http://donewaiting.com/board/ |
|
| Amp repair http://donewaiting.com/board/viewtopic.php?f=7&t=20507 |
Page 1 of 2 |
| Author: | Independent Playground [ Fri Sep 21, 2007 11:59 pm ] |
| Post subject: | Amp repair |
| Author: | blammo [ Sat Sep 22, 2007 12:55 am ] |
| Post subject: | |
If anyone has any suggestions other than , I'm all ears. I love 'em but dang. It'd be nice to have a slightly more economical option. |
|
| Author: | eqj [ Sat Sep 22, 2007 12:06 pm ] |
| Post subject: | |
It depends on which tube is blown but you can replace some yourself. There's some (that haven't been inducted into the vacuum tube cabal) that say you can do them all yourself and the mystic rite known as "biasing" is smoke and mirrors created to bilk us regular folks out of cash. You can generally tell if a tube is blown just by looking at them. Buy a matched set and replace them. Also, B. Swinski and I would both like to know if there is more than Abell Audio (and I think, Fifth Ave. Fret shop) in town doing this sort of work. |
|
| Author: | teenageteenageteenage [ Sat Sep 22, 2007 8:43 pm ] |
| Post subject: | |
| Author: | kang [ Sat Sep 22, 2007 10:11 pm ] |
| Post subject: | |
I am pretty sure rob also works out of dave bush guitar repair on north high (north of morse). I have heard nothing but good things about him[/list] |
|
| Author: | jonny5 [ Sun Sep 23, 2007 11:41 am ] |
| Post subject: | |
| Author: | LudwigVanHagar [ Sun Sep 23, 2007 1:17 pm ] |
| Post subject: | |
| Author: | LudwigVanHagar [ Sun Sep 23, 2007 1:27 pm ] |
| Post subject: | |
| Author: | mustainiac [ Mon Sep 24, 2007 10:30 am ] |
| Post subject: | |
| Author: | john also [ Mon Sep 24, 2007 12:18 pm ] |
| Post subject: | |
| Author: | Independent Playground [ Mon Sep 24, 2007 2:50 pm ] |
| Post subject: | |
Thanks for all the suggestions. I was hoping to avoid Abel. Its good to know there are other options. Its a power tube thats blown. I thought about just changing them out myself, but I just got this amp, so I'd like to have it looked over. |
|
| Author: | fairplay [ Tue Sep 25, 2007 10:10 am ] |
| Post subject: | |
| Author: | Seven Sounds [ Tue Sep 25, 2007 3:54 pm ] |
| Post subject: | |
I like reading those books, but they always harp about how I'm going to electrocute myself if I actually try anything. Do you have any favorites you've found? Especially ones that tell me how not to electrocute myself, instead of just warning that I probably will? I want to finally take my balls out one of these days- they could use the fresh air. And god knows I've spent enough on repairs to last a lifetime. |
|
| Author: | Nice red shorts! [ Tue Sep 25, 2007 5:39 pm ] |
| Post subject: | |
| Author: | Nice red shorts! [ Tue Sep 25, 2007 5:48 pm ] |
| Post subject: | |
| Author: | cruise_elroy [ Tue Sep 25, 2007 9:32 pm ] |
| Post subject: | |
this pretty much lays it all out: http://www.duncanamps.com/technical/lvbias.html it gives some pretty in depth explanations at first (as it defines each method), but if you start by reading through the instructions on how to actually do it you can get a good idea of what's (gonna supposed to be) happening, and not get immediately discouraged by technical jargon. there's also a whole section (labeled SAFETY ADVISORY) about what they mean when they say 'be careful' - i.e. 'here's how to not electrocute yourself.' |
|
| Author: | Seven Sounds [ Wed Sep 26, 2007 4:57 pm ] |
| Post subject: | |
Awesome thanks! I'll check that stuff out. |
|
| Author: | Anaerobia [ Sat Sep 29, 2007 2:22 pm ] |
| Post subject: | |
| Author: | Independent Playground [ Mon Sep 08, 2008 3:46 pm ] |
| Post subject: | Re: Amp repair |
So, I finally broke down and took my amp to Randy at Vintage Amp Repair and I just wanted to recommend him to anyone that needs work done on a tube amp. Fair prices, quick turnaround, and my amp sounds better than ever. |
|
| Author: | Ace Ridge [ Tue Sep 09, 2008 11:50 am ] |
| Post subject: | Re: |
| Author: | seamonster66 [ Tue Sep 09, 2008 5:05 pm ] |
| Post subject: | Re: Amp repair |
I have used Vintage Amp Repair Randy too It took him about 3 days to fix it, and he did well Abell audio estimated 5 weeks and whoever answered the phone used this bitchy little voice, so obviously I will never go there again I'm a manners guy |
|
| Author: | marksee123 [ Tue Sep 09, 2008 7:23 pm ] |
| Post subject: | Re: Amp repair |
I hesitate to say this, because he's like my own little secret repair guy, but since he has done such great work for me in the past, I have to give him some props. Bob Walker. Walker electronics. 614-237-0701 Anyone else ever go to this guy? He is fantastic at amp repair! |
|
| Author: | CharlesJunk [ Wed Sep 10, 2008 11:11 am ] |
| Post subject: | Re: Amp repair |
Not only is Abel expensive, but those guys just aren't happy to see you bring in any work for them. Not personable, just cranky and I'd rather not give them my money. They can do the job, but again...I'd rather it go to someone who seems like they're interested in helping me out. Randy's good, but not fast. But he loves what he does and knows it inside and out. Definitely the better choice. |
|
| Author: | Independent Playground [ Thu Sep 11, 2008 10:39 pm ] |
| Post subject: | Re: Amp repair |
| Author: | tom of lindsay [ Tue Dec 09, 2008 9:02 am ] |
| Post subject: | Re: Amp repair |
+1 for Randy Adkins I had him look over my Bassman 100 head that I got on eBay a while back. It had been giving me some problems, blowing fuses, etc, so I took it in to Randy to get fixed. Let me just say this, this guy loves what he does, he is extremely friendly and knowledgable, and does not talk down to you even if you are a tube amp novice. And on top of all that, his rates beat the pants off of Abell. Highly recommended. 614-491-4965 |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|